Sharp AR-M355N - Manual (Page 213)

ABOUT THE WEB PAGES (FOR USERS)
3-4
Directly printing a file on a computer
The address of a file that can be accessed from your computer can be specified to directly print the file without using
the printer driver.
In addition to files on your computer, files on any other computer on the same network that can be accessed from
your computer can be printed in this way.
To directly print a file on a computer, follow these steps:
1 Click [Submit Print Job] in the link menu of
the menu frame.
The "Submit Print Job" page appears.
2 Select print settings in [Job Detail].
The settings are described in the table below.
3 Enter the address of the file that you wish
to print in [Enter Filename].
You can also click [Browse] to browse for the file.
4 Click [Print].
Printing begins.
Advanced job settings
NOTE
• Only PDF and TIFF files can be printed.
• To print PDF files, the optional PS3 expansion kit must be installed. Encrypted PDF files cannot be printed.
Item Description
Factory default
setting
Copies Set the number of copies from 1 to 999. 1
Paper Size Select the size of paper to be used for printing. Not Specified
Orientation Select the printing orientation. (Portrait / Landscape) Portrait
Binding Edge Select the binding position for two-sided printing. (Left / Top / Right) Left
Duplex To print on both sides of the paper, select this checkbox. (Only for
models that support the two-sided printing.) Not selected
Staple Select a staple setting. (Off / 1 Staple / 2 Staples) Off
Account Number
When "AUDITING MODE" is enabled in the key operator programs,
enter your 5-digit account number.
-
Quick File
To save a job using Quick File of the document filing function, select
this checkbox.
-