Sharp AR-M355N User Manual

Page 276

INSTALLING PRINTER DRIVERS USING THE "ADD PRINTER WIZARD"

■

■ Example of installation of a printer driver using the "Add Printer Wizard" in Windows XP

The method for installing a printer driver using the "Add Printer Wizard" in Windows XP is shown below.
The installation example assumes that the printer is connected as a local printer (see "CONNECTING THE
MACHINE TO YOUR COMPUTER" on page 18) and that the CD-ROM drive is drive "R". The procedure may
differ depending on the system environment.

Start Windows XP.

Insert the supplied CD-ROM into the CD-
ROM drive.

Click the [start] button, click [Control
Panel], click [Printers and Other
Hardware], and then click [Printers and
Faxes].

Click [Add a printer] in [Printer Tasks].

Follow the on-screen instructions.

To specify the printer driver path, enter the
following path:

R:\Drivers\Printer\English A*\PCL5e\2kxp or
R:\Drivers\Printer\English A*\PCL6\2kxp

* "English A" in North America. "English" in

Europe.

■

■ Installing PCL Display Fonts

The PCL display fonts are fonts displayed on your computer screen. The "SOFTWARE CD-ROM (1)" contains
the PCL display fonts that correspond to the resident fonts in the machine. These display fonts can be installed
to your computer (Windows 95/98/Me/NT 4.0/2000/XP/Server 2003) from the installer. When installing the PCL
display fonts using the Windows installation procedure instead of the installer ([Start] - [Settings] - [Control
Panel] - [Fonts] - [Install] - [New Font]), specify the following path.
R:\Drivers\Printer\Font\PCLFont (Where "R" represents the letter of your CD-ROM driver.)

inst_us.book 17 ページ２００４年９月２日　木曜日　午前１０時１９分