Sharp AR-M355N - Manual (Page 203)

SELECTING PRINTING FUNCTIONS
2-9
Settings in the [Advanced] tab
The following screen appears when the [Advanced] tab is selected. The settings and buttons in this screen are
explained below.
(1) Image Quality
This item is used to select the [Resolution Settings]
and [Graphics Mode] for printing.
[Resolution Settings]
Select 300 dpi or 600 dpi.
Default setting: 600 dpi
[Graphics Mode]
Select [Raster] or [Vector] (HP-GL/2). [Raster] is
used to print with raster graphics, and [Vector] is
used to print with Vector (HP-GL/2) commands.
Default setting: Vector (HP-GL/2)
(2) Image Adjustment
This field is used to adjust the brightness and
contrast.
[Brightness]
This adjusts the brightness of colors. The
brightness can be set from 0 to 100. Colors will
appear closer to white as the number is increased.
Default setting: 50
[Contrast]
The contrast can be set from 0 to 100. The higher
the number, the higher the contrast.
Default setting: 50
(3) Text To Black
Use this setting to have all text other than white text
printed in black. (This setting is useful when
printing faint colored text that is difficult to read.)
(4) Vector To Black
Use this setting to have all lines or areas other than
white lines areas printed in black. (This setting is
useful when printing faint colored lines or areas
that are difficult to recognize.)
(1)
(2)
(4)
(3)
Print data
Printing result
Text To
Black Text To
Black
Print data
Printing result
Vector To
Black
Vector To
Black
ABCD
EFGH ABCD
EFGH ABCD
EFGH