Storing, deleting, and using original sizes, Storing or deleting an original size, Using a stored original size – Sharp AR-M355N User Manual
Page 296: 1storing, deleting, and using original sizes
1-9
1
STORING, DELETING, AND USING ORIGINAL SIZES
Up to 9 special original sizes can be stored. Stored sizes can be easily called up and are not erased if the power is
turned off. Storing a frequently used original size saves you the trouble of manually setting the size each time you
fax that size of document.
● To cancel an original size storing, using, or deleting operation, press the [CA] key or touch the [ORIGINAL] key
on the screen.
STORING OR DELETING AN ORIGINAL SIZE
1
Touch the [ORIGINAL] key.
2
Touch the key under [SCAN SIZE].
3
Touch the [CUSTOM SIZE] key.
4
Touch the [STORE/DELETE] key.
5
Touch the original size key (
) that
you wish to store or delete.
To store an original size,
touch a key that does not
show a size (
).
Keys that already have an
original size stored will show
the stored size (
).
To delete or change a
stored size, touch the key that shows the size that you
wish to delete or change.
●If you are storing an original size, go to step 6.
●If you are deleting an original size, go to step 8.
●If you are changing an original size, go to step 8
and touch the [AMEND] key.
6
Enter the X (width) and Y (length) dimensions
of the original with the
keys.
X (width) is initially
selected.
Enter X and then touch
the (
) key to enter Y.
A width of 2-1/2 to 17
inch (64 to 432 mm) can
be entered in X, and a
length of 2-1/2 to 11-5/8 inch (64 to 297 mm) can
be entered in Y.
7
Touch the [OK] key.
The original size entered in step 6 is stored in the
key selected in step 5.
To exit, touch the [ORIGINAL] key.
8
When you touch a key that shows an
original size in step 5, a message screen
appears that contains the keys [CANCEL],
[DELETE], and [AMEND].
● To cancel the procedure, touch the [CANCEL] key.
● To delete the selected original size, touch the
[DELETE] key.
● To change the original size stored in the key, touch
the [AMEND] key. The screen of step 6 will appear
to let you change the size.
9
To exit, touch the [ORIGINAL] key.
USING A STORED ORIGINAL SIZE
1
Follow steps 1 to 3 of "STORING OR
DELETING AN ORIGINAL SIZE".
2
Touch the original size key that you wish
to use.
3
Touch the [OK] key.
The stored original size is called up.
AUTO
8 X11
ORIGINAL
STANDARD
RESOLUTION
1
/
2
100%
SCAN SIZE
AUTO 8 X11
2-SIDED
BOOKLET
2-S
TAB
1
/
2
CUSTOM
SIZE
STANDARD SI
MANUAL
5 X8 R
5 X8
5R
1
/
2
1
/
2
1
/
2
1
/
2
RECALL
STORE/DELETE
RECALL
STORE/DELETE
X5 Y10
1
/
2
1
/
8
X5 Y10
1
/
2
1
/
8
CANCEL
OK
17
11
(2 1/2
17)
inch
RECALL
Y
X
A
X
Y
STORE/DELETE
(2 1/2
11 5/8)
inch
RECALL
STORE/DELETE
X5 Y10
1
/
2
1
/
8
Tiger2_fax_sec.book 9 ページ ２００４年９月１６日 木曜日 午前８時５３分