Sharp AR-M355N - Manual (Page 293)

1-6
ORIGINALS
ORIGINALS THAT CAN BE FAXED
■ ■ ■ ■ Original sizes
■ ■ ■ ■ Automatic reduction of faxed document
If the size (width) of the faxed document is greater than the receiving machine's paper size, the size will be
automatically reduced.
A document can also be faxed without reducing its size. In this case, the left and right edges will not be
transmitted. (See "Auto reduction sending setting" on page 8-7.)
Minimum original size Maximum original size
Using the automatic
document feeder
8-1/2" (width) x 5-1/2" (length)
(A5: 210 mm (width) x 148 mm (length))
5-1/2" (width) x 8-1/2" (length)
(A5R: 148 mm (width) x 210 mm (length))
11" (width) x 31-1/2" (length)
(297 mm (width) x 800 mm (length))
Using the document glass
11" (width) x 17" (length)
(297 mm (width) x 431.8 mm (length))
NOTE
Originals that are not a standard size (5-1/2"x8-1/2", 8-1/2"x11", 8-1/2"x11"R, 8-1/2"x14", 11"x17", A5, B5, B5R,
A4, A4R, B4, A3) can also be faxed.
Faxed document width
Receiving machine's
paper width
Reduced size Ratio (Area ratio)
11"x17" (A3) 8-1/2"x14" (B4) 8-1/2"x14" (B4) 1 : 0.64 (1 : 0.78)
11"x17" (A3) 8-1/2"x11" (A4) 8-1/2"x11"R (A4R) 1 : 0.5 (1 : 0.5)
Tiger2_01.fm 6 ページ ２００４年９月２０日 月曜日 午前１０時０分