Sharp AR-M355N - Manual (Page 271)

INSTALLING THE PRINTER DRIVER AND UTILITIES (SOFTWARE INSTALLATION)
12
Installation method 3
Use this procedure to install the software in the following environments:
1. The printer is connected by USB cable.
2. Windows version: Windows 98/Me/2000*
1
Installing the software in Windows 98/Me or Windows 2000 (USB/interface)
Install the software as follows.
Before starting the installation, make sure the USB interface cable is not connected to the machine.
The procedure for installing the printer driver is explained here using Windows Me as an example.
1 Insert the "SOFTWARE CD-ROM (1)" that
accompanied the machine into your CD-
ROM drive.
2 Double-click [My Computer], and then
double-click the CD-ROM icon.
3 Double-click the [SETUP] icon.
4 The License Agreement window will
appear. Make sure that you understand
the contents of the license agreement, and
then click the [Yes] button.
5 After confirming the message in the
"Welcome" window, click the [Next]
button.
6 Follow the on-screen instructions.
7 Click the [Printer Driver] button.
To view detailed information on the software, click
the [Display Readme] button.
● If you wish to install the PC-FAX driver, click the
[Utility Software] button in this window and then
click the [PC-FAX Driver] button and follow the on-
screen instructions.
8 Click the [Next] button.
9 Click the [Custom installation] button.
10 Click the [Connected to this computer]
and click the [Next] button.
11 When you are asked to select the
interface, select [USB] and click the [Next]
button.
NOTE
*1 To install the software using the installer, you must have administrator's rights.
inst_us.book 12 ページ ２００４年９月２日 木曜日 午前１０時１９分