Sharp AR-M355N - Manual (Page 308)

2-9
2
PRIORITY TRANSMISSION OF A STORED JOB
If you have an urgent transmission job and multiple transmission jobs have already been stored, you can give priority
to the urgent job so that it will be transmitted immediately after the job currently being executed. This is done from the
job status screen. For details on using the job status screen, refer to page 1-15 of "Operation manual (for general
information and copier operation)".
1 Press the [JOB STATUS] key.
2 Touch the [FAX JOB] key.
3 Touch the key of the job to which you wish
to give priority.
The touched key is highlighted.
4 Touch the [PRIORITY] key.
The selected job moves
up to the next position
after the job currently
being executed.
When the current job is
completed, execution
begins of the job
selected in step 3.
CANCELING A FAX TRANSMISSION
You can cancel a transmission job that is in progress or has been stored. Cancellation is done from the fax job status
screen. (Printing of a received fax cannot be canceled.)
1 Press the [JOB STATUS] key.
2 Touch the [FAX JOB] key.
3 Touch the key of the job that you wish to
cancel.
The touched key is highlighted.
4 Touch the [STOP/DELETE] key.
A message appears to
confirm the cancellation.
Touch the [YES] key to
delete the selected job
key and cancel the
transmission.
CANCELING ON-HOOK DIALING
To cancel on-hooking dialing (dialing by touching the [SPEAKER] key and then the numeric keys) when you need
to redial the number or because transmission was interrupted, touch the [SPEAKER] key once again.
FAX JOB
DETAIL
PRIORITY
STOP/DELETE
WAITING
WAITING
WAITING
NOTE
If the job in progress is a broadcast transmission job
(see page 3-2) or a serial polling job (see page 3-13),
the priority job will temporarily interrupt the job after the
transmission currently in progress is finished. When the
priority job is finished, the broadcast transmission or
serial polling job will resume. However, if the priority job
is also a broadcast transmission or serial polling
operation, the job is begun after all transmissions of the
current broadcast or serial polling job are completed.
DETAIL
FAX JOB
PRIORITY
STOP/DELETE
AITING
AITING
AITING
FAX JOB
DETAIL
PRIORITY
STOP/DELETE
WAITING
WAITING
WAITING
NOTES
● If you do not wish to cancel the transmission,
touch the [NO] key.
● "CANCEL" will appear in the Transaction Report
of a job that is canceled.
DETAIL
FAX JOB
PRIORITY
STOP/DELETE
AITING
AITING
AITING
Tiger2_fax_sec.book 9 ページ ２００４年９月１６日 木曜日 午前８時５３分