Symbol Technologies MC9000-G - Manual (Page 42)

MC9000-G Product Reference Guide for Embedded Windows® CE .NET 1-12
Spare Battery Charging
The mobile computer has three accessories that can be used to charge spare batteries.
• Single Slot Serial/USB Cradle
• Four Slot Spare Battery Charger
• UBC Adapter.
To charge a spare battery:
1. Connect the charging accessory to the appropriate power source, see Chapter 7,
Accessories for setup.
2. Insert the spare battery into the spare battery charging slot and gently press down on the
battery to ensure proper contact.
3. The battery starts to charge automatically. The amber charge LED on the accessory lights to
show the charge status, see
Chapter 7, Accessories for charging indications.
The battery usually fully charges in less than four hours.
A Short Battery Adapter is required to charge the MC9000-S spare battery in
either the Single Slot Serial/USB Cradle or the Four Slot Spare Battery
Charger, see
Single Slot Serial/USB Cradle on page 7-8 or Four Slot Spare
Battery Charger on page 7-16 .