Symbol Technologies MC9000-G - Manual (Page 184)

MC9000-G Product Reference Guide for Embedded Windows® CE .NET 4-22
DHCP Server Configuration
If you use a DHCP server to distribute IP addresses and other network parameters, setup the server
as following:
• IP address pool (1 or 5 IP address per cradle)
• Router/gateway address
• One or more DNS server addresses
• One or more WINS server addresses
• Subnet mask.
To assign the initial cradle IP address, you can either use a DHCP server, as
shown above, or use the MobileDox Cradle Manager, see
Installing
MobileDox Cradle Manager on page 4-16 . DHCP server is the preferred
method.