Symbol Technologies MC9000-G - Manual (Page 157)

Settings 3-63
Scan Parameters
Use the Scan Parameters window to set the scan parameters.
1. Double-tap the Ctl Panel icon - double-tap Scanner Settings - double-tap Scan Params. The
Scan Parameters window appears.
Figure 3-59. Scan Parameters Window
2. To change any item in the Scan Parameters column, use the up and down arrows
to select the item.
3. Use the left and right arrow buttons to increment the value. Table 3-11 list the Scan
Parameter value options.
Table 3-11. Scan Parameters
Scan Parameters Values
Code ID Type None, Symbol, AIM
Scan Type Forgrnd, Bkgrnd, Monitor
Local Feedback True, False
WAV File See Figure 3-60 on page 3-65 , Tap Decrement to move back on
the WAV file listing and Increment to move forward on the
WAV file listing. Tap OK to select the WAV file.
Beep Time 0-5000 in increments of 100ms
Beep Freq 2500-3500 in increments of 10