Symbol Technologies MC9000-G - Manual (Page 273)

Spectrum24 Network Configuration 6-37
WLAN Adapter Tab
Use the WLAN Adapter tab to configure hardware and radio settings. Use the Card Type: PCMCIA to
specify the antenna type and the Radio Link Rate radio buttons to specify the data rate supported.
Figure 6-25. WLAN Adapter Tab
Table 6-17. WLAN Adapter Tab Fields
Field Description
Diversity Antenna Select Diversity Antenna if dual antenna support is required. Diversity improves
communication in highly reflective environments. Do not select diversity if a secondary
antenna is not being used. Using diversity in a single antenna application can cause poor
wireless network performance.
Radio Link Rate Use the Radio Link Rate radio buttons to specify the data rate supported. The mobile
computer can use 1MB, 2MB or both. If Both 1MB and 2MB Support is selected, the mobile
computer defaults to a 1 Mbps data rate if a 2 Mbps data rate cannot be established.
Password Spectrum24 FH settings has a password protection feature that can be turned on and off
from the WLAN Adapter tab. When the Spectrum24 FH program is initially launched, the
password is off (default).