Magnetic stripe reader, Magnetic stripe reader -18 – Symbol Technologies MC9000-G User Manual
Page 294
MC9000-G Product Reference Guide for Embedded Windows® CE .NET
7-18
Magnetic Stripe Reader
This section describes how to set up and use the snap-on MSR with the MC9000-G. The MSR snaps
on to the mobile computer and can be removed easily when not in use.
Figure 7-11. MSR
The MSR:
•
Provides mobile computer’s operating power and battery charging power when used with
the Symbol approved power supply and cable.
•
Allows the mobile computer to capture data from magnetic stripe cards. (To download MSR
data capture software, visit:
.)
•
Provides serial connection through the serial pass-through port for communication with a
serial device, such as a host computer. For communication setup procedures, see
Communications Setup on page 4-10
•
Provides USB connection through the USB pass-through port for communication with a USB
device, such as a host computer. For communication setup procedures, see
•
Charges the mobile computer’s battery, when used with the appropriate power supply.
Card Reader Slot
Latches
Power Port
Communications Port
Pogo Pin Pass Through
Connector
Latch Grip