Symbol Technologies MC9000-G - Manual (Page 24)

MC9000-G Product Reference Guide for Embedded Windows® CE .NET xxii
Chapter Descriptions
Topics covered in this guide are as follows:
• Chapter 1, Getting Started describes the mobile computer’s physical characteristics, lists the
mobile computer accessories, explains how to install and charge the batteries, explains how
to replace the strap lanyard, explains how to remove and replace the stylus and explains
how to start the mobile computer for the first time.
• Chapter 2, Operating the MC9000-G explains how to use the mobile computer. This includes
instructions for powering on and resetting the mobile computer, entering data and scanning.
• Chapter 3, Settings explains how to adjust settings on the mobile computer.
• Chapter 4, Communications explains how to use Microsoft
®
ActiveSync™ for
communications between the mobile computer and host computer.
• Chapter 5, Applications explains how to use the installed applications.
• Chapter 6, Spectrum24 Network Configuration describes how to configure the Spectrum24
wireless connection.
• Chapter 7, Accessories describes the mobile computer accessories, including setup and
configuration.
• Chapter 8, Software Installation provides an overview of the SMDK installation and its uses.
• Chapter 9, AirBEAM Smart explains how to set up the mobile computer to synchronize with
a server using the AirBEAM Smart Client and AirBEAM Staging applications.
• Chapter 10, Rapid Deployment Client facilitates software downloads to a mobile device
from a Mobility Services Platform (MSP) Console FTP server.
• Chapter 11, Mobile Computer Configuration explains how to use the Terminal Configuration
Manager (TCM) and explains how to use the Initial Program Loader (IPL).
• Chapter 12, Desktop Emulator provides instructions for installing the desktop emulator on
the host computer and using the desktop emulator as an aid in developing applications.
• Chapter 13, Maintenance and Troubleshooting provides information on proper mobile
computer maintenance and troubleshooting.
• Appendix A, Technical Specifications includes the technical specifications and connector pin
outs for the mobile computer.
• Appendix B, Keypad Maps provides the keypad mapping information for the mobile
computer.