MITSUBISHI ELECTRIC MR-J2S- CP - Manual (Page 33)

1 - 14
1. FUNCTIONS AND CONFIGURATION
(2) Model
Rating plate
MR–J2S–100CP or less MR–J2S–200CP 350CP
Built-in positioning functions
Rated output
Rating plate
Rating plate
MR–J2S–
Series
CP
Power Supply
Power supply
None
3-phase 200 to 230VAC
(Note 1)
1-phase 230VAC
(Note 2)
1
1-phase 100V to 120VAC
Symbol
Rated
output [W]
100 10
Symbol
200 20
400 40
600 60
750 70
1000 100
2000 200
3500 350
Rated
output [W]
Symbol
5000 500
7000 700
MR-J2S-500CP MR-J2S-700CP
Rating plate
Note 1. 1-phase 230V is supported
by 750W or less.
2. 1-phase 100V to 120V is
supported by 400W or less.
1.5 Combination with servo motor
The following table lists combinations of servo amplifiers and servo motors. The same combinations apply
to the models with electromagnetic brakes and the models with reduction gears.
Servo motors
HC-SFS HC-UFS Servo amplifier
HC-KFS HC-MFS
1000r/min 2000r/min 3000r/min
HC-RFS
2000r/min 3000r/min
MR-J2S-10CP(1) 053 13 053 13 13
MR-J2S-20CP (1) 23 23 23
MR-J2S-40CP (1) 43 43 43
MR-J2S-60CP 52 53
MR-J2S-70CP 73 73 72 73
MR-J2S-100CP 81 102 103
MR-J2S-200CP 121 201 152 202 153 203 103 153 152
MR-J2S-350CP 301 352 353 203 202
MR-J2S-500CP 502 353 503 352 502
MR-J2S-700CP 702
Servo motors
HA-LFS Servo amplifier
1000r/min 1500r/min 2000r/min
(Note 1)
HC-LFS
MR-J2S-60CP 52
MR-J2S-100CP 102
MR-J2S-200CP 152
MR-J2S-350CP 202
MR-J2S-500CP 502 302
MR-J2S-700CP (Note 2) 601 (Note 2)701M 702
Note 1. These servo motors may not be connected depending on the production time of the servo amplifier. Please refer to Appendix 3.
2. Consult us since the servo amplifier to be used with any of these servo motors is optional.