Installing the ce batch portable application, Reaching your device installation, Retrieving your device installer from the hardware – IntelliTrack Stockroom Inventory User Manual
Page 229: Support matrix

Chapter 13
Installing DMS CE Batch
201
Installing the CE Batch Portable Application
Once you complete the Batch installation prerequisites, including:
•
Determining your Remote Data Access Setup;
•
Installing IIS;
•
Installing ActiveSync or Windows Device Center Software and estab-
lishing a partnership between your computer and your device;
•
Installing the IntelliTrack workstation application and configuring IIS
dependencies;
•
Setting the firewall exceptions; please see
.
•
Determining your Device Installation;
you are ready to install the DMS application to the handheld device.
Follow the instructions found in
“Installing DMS CE Batch” on page 199
install the Batch Portable application on the handheld device.
Reaching
your Device
Installation
Your device installation is downloaded from the Hardware Support Matrix
at the IntelliTrack website (
about reaching installation setup please refer to the next sections:
ing your Device Installer from the Hardware Support Matrix” on page 201
.
Important: This section applies to DMS CE Batch; if you are using DMS
RF Batch this section does not apply to you. Before you install the applica-
tion to the device, make sure that you have set up your system for Remote
Data Access communication. Please refer to
for more information about DMS Batch setup and RDA
communication.
Retrieving
your Device
Installer from
the Hardware
Support
Matrix
To download your device installer from the Hardware Support Matrix,
your computer must be connected to the Internet.
1.
To download your device installation from the IntelliTrack Hardware
Support Matrix: open your Internet browser and go to the following
. The IntelliTrack website Home page
appears. From the IntelliTrack website, select Support > Hardware
Support Matrix from the menu bar. The Hardware Support Matrix
page appears.
2289.book Page 201 Thursday, July 7, 2011 5:10 PM