Honeywell MS-9200UDLSE User Manual

Page 76

Programming

MS-9200UDLS PN 52750:E1 01/27/09

screen to be displayed:

The programmer can continue adding modules by pressing the ESC or left arrow
key which will return the display to the Add Module Screen #1.

3.6.2.2.2 Delete Module
Pressing 2 in the Modules Screen will display the Delete Module Screen which
allows the programmer to delete a specific module:

A flashing cursor will appear in the position of the first asterisk to the left. Using
the panel keypad, key in the module address such as 005. When the last digit is
keyed in, the following confirmation that the module has been deleted will be
displayed:

3.6.2.2.3 Edit Module Screen for Monitor Module
The programmer can change a modules existing or factory default programming by
pressing 3 in the Modules Screen. The following screen will be displayed:

ADD MODULE
MODULE# 005
IS ADDED

Add Module Screen #3

MODULES
1=ADD
2=DELETE
3=EDIT

Modules Screen

DELETE MODULE
ENTER MODULE#
***

Delete Module Screen

DELETE MODULE
MODULE# 005
IS DELETED

EDIT MODULE
ENTER MODULE ADDRESS
***

Edit Module Screen

This manual is related to the following products:

MS-9200UDLS