Honeywell MS-9200UDLSE - Manual (Page 59)

Programming
MS-9200UDLS PN 52750:E1 01/27/09 59
SECTION 3
Programming
3.1 Programming Data Entry
Programming can be accomplished using the MS-9200UDLS keypad or by connecting
an optional standard computer keyboard. The keyboard can be connected to the PS-2
connector J3 on the control panel main circuit board.
The information presented in this section refers to programming the MS-9200UDLS
via the onboard keypad. If an optional computer keyboard is connected to the
MS-9200UDLS main circuit board, the following table describes the keyboard keys
which correspond to the onboard keypad keys.
NOTICE TO USERS, INSTALLERS, AUTHORITIES HAVING JURISDICTION
AND OTHER INVOLVED PARTIES
This product incorporates field-programmable software. In order for the product to comply with the requirements in the
Standard for Control Units and Accessories for Fire Alarm Systems, UL 864, certain programming features or options must
be limited to specific values or not used at all as indicated below:
Program feature
or option
Permitted in
UL 864? (Y/N)
Possible settings
Settings permitted
in UL 864
Trouble Call Limit N
Refer to "Trouble Call Limit (Dialer Runaway Preven-
tion)" on page 134.
Trouble Call Limit = 0 (factory default): unlimited
calling to Central Station for any trouble condition
Trouble Call Limit = 1 - 99: limits call for each unique
trouble to from 1 to 99 within a 24 hour period
Trouble Call Limit
= 0 for unlimited
Central Station
trouble calls
Remote Download Y
Refer to "Remote Site Upload/Download" on page 184.
Remote Download - Proprietary No
Remote Download - Proprietary Yes
Remote Download
Proprietary Yes for
Proprietary system
intended to protect
only contiguous
properties
Keypad Keys Computer Keyboard Keys
1st Event Home
CLR Delete
ESC Esc
RECALL Insert
* *
# #
A - Z A - Z
0 - 9 0 - 9
(on QZ key) Space bar
— —
/ /
• •
ENTER Enter
ACK/STEP F1
SILENCE F2
DRILL F3
RESET F4