Honeywell MS-9200UDLSE - Manual (Page 101)

Programming
MS-9200UDLS PN 52750:E1 01/27/09 101
3.6.5.3.2 Date
To change the date, press 2 while viewing the Time-Date Screen. The following
screen will be displayed:
A flashing cursor is located toward the top left of the display. Below the cursor is
the current date. To change the date, enter the two-digit month followed by the two-
digit day and then the two-digit year (01 for 2001, 02 for 2002, etc.). The cursor
will move one position to the right each time a digit is entered. After the last year
digit is entered, the display will return to the Time-Date Screen which will show the
new date entry. If an error is made while entering a digit, press the CLR key to
delete the entire entry and beginning again.
3.6.5.3.3 Clock Format
The clock can be configured to display 12 hour (AM & PM) or 24 hour (military)
time. Pressing 3 while viewing the Time-Date screen will cause the display to
toggle between 12HR and 24HR. Select 12HR for 12 hour display or 24HR for 24
hour display.
Note: If the clock is changed to 24 hour (military) format, the date will change to
the European standard of Day-Month-Year (for display purposes only).
3.6.5.3.4 Daylight Savings Time
Pressing 1 while viewing Time-Date Screen #2 will cause the following screens to
be displayed:
Pressing 1 while viewing Daylight Savings Screen #1 will cause the display to
toggle between Enabled Yes and Enabled No. The control panel will automatically
update the time for daylight savings time when Enabled Yes is selected.
Pressing 2 while viewing Daylight Savings Screen #1 will display another screen
which allows the programmer to select the month that daylight savings time will
begin. In this sub-screen, pressing 1 will select March, 2 will select April and 3 will
select May.
ENTER DATE
MONTH DAY YEAR
04-07-2006
Date Screen
TIME AND DATE
1=DAYLIGHT SAVINGS
Time & Date Screen #2
DAYLIGHT SAVINGS
1=ENABLED YES
2=START MONTH MAR
3=START WEEK WEEK-2
Daylight Savings Screen #1
Daylight Savings Screen #2
DAYLIGHT SAVINGS
1=END MONTH NOV
2=END WEEK WEEK-1