Hitachi MK-96RD617-08 - Manual (Page 189)

Using the Export Tool 7-25
Hitachi Universal Storage Platform V/VM Hitachi Performance Manager User’s Guide
[ 2] svpip 158.214.135.57 Å Displays the currently-running subcommand
[ 3] login User = expusr, Passwd = [****************] Å Displays the currently-running
subcommand
:
:
[ 6] group Port
Å Displays the currently-running subcommand
:
:
[20] apply
Å Displays the currently-running subcommand
Start gathering port data
Å Indicates that the export processing starts
Target = 16, Total = 16
+----+----+----+----+----+----+----+----+----+----+
...........................!
Å Indicates that an error occurs during the export
processing
.................................
Å Dots appear and increment as the export
processing continues
End gathering port data
Å Indicates that the export processing ends
successfully
Figure 7-6 Example of Command Prompt Outputs from Export Tool
When the Export Tool finishes successfully, monitoring data are usually
compressed in ZIP-format archive files. If you want to obtain CSV files, you
need to decompress ZIP files and extract CSV files out of the ZIP files. If the
operating system on your computer does not include a feature for
decompressing ZIP files, you need to obtain software for decompressing files.
For a complete list of files to be saved by the Export Tool, see Using the Export
Tool.
When an internal error occurs during export processing, the exclamation mark
(!) appears to signal the error. If this happens, the Export Tool will make up to
three more attempts at processing.
If export processing does not finish through three retries or if an internal error
occurs other than those in Table 7-18, the Export Tool does not retry the
processing. In this case, you need to quit the command prompt and then run
the Export Tool again.
You can change the maximum number of retries by using the retry
subcommand. For detailed information about the retry subcommand, see
retry Subcommand.
Table 7-18 Errors for Which Export Tool Retries Processing
Error Message ID Cause of Error
0001 4001 An error occurred during SVP processing.
0001 5400 Since the SVP is busy, the monitoring data cannot be obtained.
0001 5508 An administrator is changing a system environment file.
0002 2016 Array is refreshing, or the settings by the user are registered.
0002 5510 The storage system is in internal process, or some other user is changing
configuration.