Hitachi MK-96RD617-08 - Manual (Page 152)

6-20 Server Priority Manager Operation
Hitachi Universal Storage Platform V/VM Hitachi Performance Manager User’s Guide
Figure 6-9 Add WWN Window
If you add a port or host bus adapter to the storage system after the settings
above, the traffics about connections to the newly added port or host bus
adapter will not be monitored. In this case, follow the procedure above again
to make all the traffics between host bus adapters and ports monitored.
Up to 32 host bus adapters (WWNs) can be monitored for one port. If more
than 32 host bus adapters are connected to one port, the traffics about some
host bus adapters will be obliged to be excluded from the monitoring target.
Consider the intended use of each host and move the host bus adapters which
you think not necessary to be monitored to Non-Monitor by the following
steps.
To exclude traffic between a host bus adapter and a port from the monitoring
target:
1. Start Server Priority Manager and ensure that the WWN tab is displayed.
2. Select All from the list at the top right corner of the window.
3. In the upper-left tree, double-click a port to which more than 32 host bus
adapters are connected.
4. Double-click Monitor below the specified port.
5. Right-click the WWN of a host bus adapter you want to exclude from the
monitoring target and then select Delete WWN from the pop-up menu.
If you are using Windows, you can drag and drop the desired WWNs from
Monitor to Non-Monitor.