Henny Penny OEA/OGA-323 - Manual (Page 54)

Model OFE/OFG-321,322,323,324
4-3. SPECIAL PROGRAM
MODE (Continued)
Audio Effect (SP-6)
This setting lets you add an audio effect- i.e. a pulsed or
warble sound – to the beeps generated in the cook
mode.
a. Follow steps 1 and 2 above.
b. Press the PROG button 5 times. “SP-6” and “AUDIO
EFFECT” show in the display, along with the effect
value in the right of the display.
c. Press the UP and DOWN buttons to change the sound
effect of the tone. The numbers correspond as follows:
“0” = Normal Tone
“1” = Fast-Pulsed Tone
“2” = Slow-Pulsed Tone
“3” = Warble Tone
Type of shortening to be melted - Liquid or Solid (SP-7)
The Melt Cycle can be set to the type of shortening being
used.
a. Follow steps 1 and 2 above.
b. Press and release the PROG button 6 times. “SP-7”
and “MELT CYCLE SELECT” flash in the display,
along with “l=LIQ” or “2=SOLID” shows on the right
side of the display.
c. Press the UP or DOWN buttons to toggle from one type
to another.
The type of shortening being used in the open fryer
determines the amount of heat applied during the
Melt Cycle. If the controls are set to the solid
setting, less heat is applied to the shortening, than if
the controls were set to the liquid option. Too much
heat applied to solid shortening will cause excessive
smoking, and could cause a fire. This setting should
match the type of shortening being used at the time.
4-6 703