Henny Penny OEA/OGA-323 - Manual (Page 53)

Model OFE/OFG-321,322,323,324
4-3. SPECIAL PROGRAM Language (SP-2)
MODE (Continued)
a. Follow steps 1 and 2 above.
b. Press and release the PROG button. “SP-2” and
“LANGUAGE” flash on the display, along with the
language type in the right side of the display
(Ex., “1.ENGL”).
c. To toggle to the desired language, press and release the UP
and DOWN buttons.
System Initialization (SP-3)
This step will reset the cook programs to factory settings.
a. Follow steps 1 and 2 above.
b. Press and release the PROG button twice. “SP-3” and
“DO SYSTEM INIT” flash in the display, along with
“INIT” on the right side of the display.
c. Press and hold the DOWN button. “INIT”
shows on the display, a tone sounds, and “IN 3”,
“IN 2”, “IN 1” flashes on the right side of the display.
When “INIT” starts flashing on the left side of the display,
release the DOWN button. When “DONE” shows
on the display, the initialization is complete, and the
controls now have factory preset parameters.
Audio Volume (SP-4)
The volume of the speaker can be adjusted.
a. Follow steps 1 and 2 above.
b. Press the PROG button 3 times. “SP-4” and
“AUDIO VOLUME” flash in the display, along
with the volume value on the right side of the display.
c. Press the UP and DOWN buttons to adjust the volume of
the speaker, 10 being the maximum value and 1 the
minimum.
Audio Tone (SP-5)
The tone of the speaker can be adjusted.
a. Follow steps 1 and 2 above.
b. Press the PROG button 4 times. “SP-5” and
“AUDIO TONE (HZ)” flash in the display, along
with the tone value on the right side of the display.
c. Press the UP and DOWN buttons to adjust the tone of
the speaker, 2000 being the maximum, 50 being the
minimum.
703 4-5