Henny Penny 323 - Manual

Model OFE/OFG-321,322,323,324
SECTION 2. INSTALLATION
2-1. INTRODUCTION
This section provides the installation instructions for
the Henny Penny Open Fryer.
Installation of the unit should be performed only by a
qualified service technician.
Do not puncture the unit with any objects such as
drills or screws as component damage or electrical
shock could result.
2-2. UNPACKING
The Henny Penny Open Fryer has been tested, inspected, and
expertly packed to ensure arrival at its destination in the best
possible condition. The unit is banded to a wooden skid and
then packed inside a heavy cardboard carton with sufficient
padding to withstand normal shipping treatment.
Any shipping damage should be noted in the presence
of the delivery agent and signed prior to his or her
departure.
1. Carefully cut bands from cardboard carton.
2. Lift carton from the unit.
3. Cut and remove the metal bands holding the fryer to the
pallet.
4. Remove the fryer from the pallet.
Take care when moving the fryer to prevent
personal injury. The fryer can weigh between
305 lbs. (138 kg) and 616 lbs. (279 kg).
2-1 703