Vibrate – good read, Vibrate duration, Beeper pitch – error – Honeywell Granit 1991iSR Ultra-Rugged Standard-Range Barcode Scanner User Manual
Page 96

80
Granit XP User Guide
Vibrate – Good Read
The scanner vibrates once when a barcode is successfully read, and twice when a
programming barcode is successfully read. When a programming barcode is
unsuccessful, the scanner emits one long vibration (2 times the Vibrate Duration
length). Scan
Vibrate - Good Read Off
to keep the scanner from vibrating.
Default
= Vibrate - Good Read On.
Vibrate Duration
If you want to set the length for the good read vibration, scan the barcode below,
then set the duration (from 100 - 2,000 milliseconds) by scanning digits from the
Save
.
Default = 100 ms.
Beeper Pitch – Error
The beeper pitch codes modify the pitch (frequency) of the sound the scanner
emits when there is a bad read or error.
Default = Razz.
Vibrate- Good Read Off
*Vibrate- Good Read On
Vibrate Duration
* Razz (250 Hz)
Medium (3250 Hz)
High (4200 Hz)