Upc-e0 expand, Upc-e0 addenda required, Addenda timeout – Honeywell Granit 1991iSR Ultra-Rugged Standard-Range Barcode Scanner User Manual
Page 179
Granit XP User Guide
163
UPC-E0 Expand
UPC-E Expand expands the UPC-E code to the 12 digit, UPC-A format.
Default = Off.
UPC-E0 Addenda Required
When
Required
is scanned, the scanner will only read UPC-E barcodes that have
addenda.
Default
=
Not Required.
Addenda Timeout
You can set a time during which the scanner looks for an addenda. If an addenda is
not found within this time period, the data can be either transmitted or discarded,
based on the setting you are using for
(in milliseconds) for this timeout by scanning the barcode below, then setting the
timeout (from 0-120 milliseconds) by scanning digits from the
beginning on page 289 of this manual, then
Save
.
Default = 500.
Note:
The Addenda Timeout setting is applied to all addenda and coupon code searches.
On
* Off
Required
* Not Required
Addenda Timeout