Other programming selections, Symbol – Honeywell Granit 1991iSR Ultra-Rugged Standard-Range Barcode Scanner User Manual
Page 137

Granit XP User Guide
121
beginning on page 289. For example, 50 characters is entered as
0050
.
Note: 9999
indicates all lengths.
Step 6.
Editor Commands
Refer to
that represent the command you want to enter.
Step 7.
Scan
Save
to save your data format, or
Discard
to exit without saving your
changes.
Other Programming Selections
•
Clear One Data Format
This deletes one data format for one symbology. If you are clearing the primary
format, scan
0
from the
beginning on page 289. If you are
clearing an alternate format, scan
1, 2
, or
3
, depending on the format you are
clearing. Scan the Terminal Type and Code I.D. (see
277), and the barcode data length for the specific data format that you want to
delete. All other formats remain unaffected.
•
Clear all Data Formats
This clears all data formats.
•
Save
Exit and save your data format changes.
•
Discard
Exit without saving any data format changes.
Enter Data Format
Save
Discard
Clear One Data Format
Clear All Data Formats