User specified intercharacter delay, Interfunction delay – Honeywell Granit 1991iSR Ultra-Rugged Standard-Range Barcode Scanner User Manual
Page 133
Granit XP User Guide
117
User Specified Intercharacter Delay
An intercharacter delay of up to 5000 milliseconds (in 5ms increments) may be
placed after the transmission of a particular character of scanned data. Scan the
Delay Length
barcode below, then scan the number of 5ms delays from the
Save
.
Next, scan the
Character to Trigger Delay
barcode, then the 2-digit hex value for a
printable character to trigger the delay (see
)
To remove this delay, scan the
Delay Length
barcode, and set the number of
delays to
0
. Scan the
Save
Interfunction Delay
An interfunction delay of up to 5000 milliseconds (in 5ms increments) may be
placed between the transmission of each control character in the message string.
Scan the
Interfunction Delay
barcode below, then scan the number of 5ms delays,
and the
Save
barcode from the
To remove this delay, scan the
Interfunction Delay
barcode, then set the number
of delays to 0. Scan the
Save
Delay Length
Character to Trigger Delay
Interfunction Delays
Prefix
Scanned Data
Suffix
1
2 3 4 5
STX
HT
CR
LF
Interfunction Delay