Honeywell Granit 1991iSR Ultra-Rugged Standard-Range Barcode Scanner - Manual (Page 66)

50 Granit XP User Guide
Page
Page Mode
By default, the page button on the base or Access Point pages the scanners associ-
ated with that base or Access Point. If you want the page button on your base or
Access Point to be disabled, scan the
Page Mode Off barcode, below. When Page
Mode is off, the base or Access Point will no longer page scanners when the button
is pressed. The red LED on the base or blue LED on the Access Point will remain lit
to indicate that page mode is off. (This light will go out when the button is pressed,
then back on when it’s released.)
Default = Page Mode On.
Page Pitch
When you press the page button on the base or Access Point, the scanners associ-
ated with that base or Access Point will begin beeping (see
Page Button on page
43). You can set the pitch of the paging beep for each scanner by scanning one of
the following barcodes.
Default = Low.
* Page Mode On
Page Mode Off
* Low (1000 Hz)
Medium (3250 Hz)
High (4200 Hz)