Connect with keyboard wedge – Honeywell Granit 1991iSR Ultra-Rugged Standard-Range Barcode Scanner User Manual

Page 20

Text mode
Original mode

Granit XP User Guide

The unit defaults to a USB PC Keyboard. Refer to

page 16

for other USB terminal

settings.

For additional USB programming and technical information, refer to “USB Applica-
tion Note,” available at

www.honeywellaidc.com.

Connect with Keyboard Wedge

A scanner or cordless base can be connected between the keyboard and PC as a
“keyboard wedge,” where the scanner provides data output that is similar to key-
board entries. The following is an example of a keyboard wedge connection:

1. Turn off power and disconnect the keyboard cable from the back of the termi-

nal/computer.

2. Connect the appropriate interface cable to the device and to the terminal/

computer.

Note:

The power supply must be ordered separately, if needed.

Corded Granit XP Scanner Keyboard Wedge Connection: