Host ack on/off, Host ack timeout, Host ack responses – Honeywell Granit 1991iSR Ultra-Rugged Standard-Range Barcode Scanner User Manual
Page 92: Host ack on/off host ack timeout

76
Granit XP User Guide
Host ACK On/Off
Host ACK Timeout
You can set a timeout for the length of time the scanner waits for a valid escape
command when using Host Acknowledgment Mode. Set the length (in seconds) for
a timeout by scanning the following barcode, then setting the timeout (from 1-90
seconds) by scanning digits from the
then
Save
.
Default = 10.
Host ACK Responses
Host ACK On
* Host ACK Off
Host ACK Timeout
Command
Action
[ESC] a,
Double beeps to indicate a successful menu change was made.
[ESC] b,
Razz or error tone to indicate a menu change was unsuccessful.
[ESC] 1,
The green LED illuminates for 135 milliseconds followed by a pause.
[ESC] 2,
The green LED illuminates for 2 seconds followed by a pause.
[ESC] 3,
The green LED illuminates for 5 seconds followed by a pause.
[ESC] 4,
Emits a beep at a low pitch.
[ESC] 5,
Emits a beep at a medium pitch.
[ESC] 6,
Emits a beep at a high pitch.
[ESC] 7,
Beeps to indicate a successful decode and communication to host.
[ESC] 8,[ESC] 8,
Razz or error tone to indicate a decode/communication to host was
unsuccessful.