No read, Video reverse – Honeywell Granit 1991iSR Ultra-Rugged Standard-Range Barcode Scanner User Manual
Page 127
Granit XP User Guide
111
No Read
With No Read turned
On
, the scanner notifies you if a code cannot be read. If using
an EZConfig-Scanning Tool Scan Data Window (see page
), an “NR” appears
when a code cannot be read. If No Read is turned
Off
, the “NR” will not appear.
Default = Off.
If you want a different notation than “NR,” for example, “Error,” or “Bad Code,” you
can edit the output message (see
beginning on page 119). The hex
code for the No Read symbol is
9C
.
Video Reverse
Video Reverse is used to allow the scanner to read barcodes that are inverted. The
Video Reverse Off
barcode below is an example of this type of barcode. Scan
Video Reverse Only
to read
only
inverted barcodes. Scan
Video Reverse and Stan-
dard Barcodes
to read both types of codes.
Note:
After scanning
Video Reverse Only
, menu barcodes cannot be read. You must scan
Video Reverse Off
or
Video Reverse and Standard Barcodes
in order to read menu
barcodes.
Note:
Images downloaded from the unit are not reversed. This is a setting for decoding only.
On
* Off
Video Reverse Only
Video Reverse and Standard
Barcodes