Honeywell Granit 1991iSR Ultra-Rugged Standard-Range Barcode Scanner - Manual (Page 187)

Granit XP User Guide 171
Require 5 Digit Addenda : All EAN-13 barcodes that begin with “978” must have a
5 digit addendum. The EAN-13 barcode with the 5 digit addendum is then trans-
mitted as a single, concatenated barcode. If a 5 digit addendum is not found within
the
Addenda Timeout period, the EAN-13 barcode is discarded.
Don’t Require 5 Digit Addenda : If you have selected Require 5 Digit Addenda, and
you want to disable this feature, scan Don’t Require 5 Digit Addenda . EAN-13 bar-
codes are transmitted, depending on the setting you are using for EAN/JAN-13
Addenda Required .
Default = Don’t Require 5 Digit Addenda.
EAN-13 Beginning with 979 Addenda Required
These settings program the scanner to require a 5 digit addenda only on EAN-13
barcodes that begin with “979.” The following settings can be programmed:
Require 5 Digit Addenda : All EAN-13 barcodes that begin with “979” must have a
5 digit addendum. The EAN-13 barcode with the 5 digit addendum is then trans-
mitted as a single, concatenated barcode. If a 5 digit addendum is not found within
the
Addenda Timeout period, the EAN-13 barcode is discarded.
Don’t Require 5 Digit Addenda : If you have selected Require 5 Digit Addenda, and
you want to disable this feature, scan Don’t Require 5 Digit Addenda . EAN-13 bar-
codes are transmitted, depending on the setting you are using for EAN/JAN-13
Addenda Required .
Default = Don’t Require 5 Digit Addenda.
* Don’t Require 5 Digit Addenda
Require 5 Digit Addenda
* Don’t Require 5 Digit Addenda
Require 5 Digit Addenda