Honeywell Granit 1991iSR Ultra-Rugged Standard-Range Barcode Scanner - Manual (Page 162)

146 Granit XP User Guide
Code 39 Code Page
Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the bar-
code being scanned was created using a code page that is different from the one
the host program is expecting. If this is the case, scan the barcode below, select the
code page with which the barcodes were created (see
ISO 2022/ISO 646 Character
Replacements on page 284), and scan the value and the Save barcode from the
Programming Chart, beginning on page 289. The data characters should then
appear properly.
Interleaved 2 of 5
< Default All Interleaved 2 of 5 Settings >
Interleaved 2 of 5 On/Off
Check Digit
No Check Digit indicates that the scanner reads and transmits barcode data with
or without a check digit.
When Check Digit is set to Validate, but Don’t Transmit , the unit only reads Inter-
leaved 2 of 5 barcodes printed with a check digit, but will not transmit the check
digit with the scanned data.
Code 39 Code Page
* On
Off