Verifone® ruby terminal, Gilbarco® terminal, Honeywell bioptic aux port – Honeywell Granit 1991iSR Ultra-Rugged Standard-Range Barcode Scanner User Manual

Page 34: Verifone, Gilbarco, Ruby terminal, Terminal

Granit XP User Guide

Verifone

Ruby Terminal

Scan the following Plug and Play code to program the scanner for a Verifone Ruby
terminal. This barcode sets the baud rate to 1200 bps and the data format to 8 data
bits, mark parity bit, 1 stop bit. It also adds a line feed (LF) suffix and programs the
following prefixes for each symbology:

Gilbarco

Terminal

Scan the following Plug and Play code to program the scanner for a Gilbarco termi-
nal. This barcode sets the baud rate to 2400 bps and the data format to 7 data bits,
even parity, 2 stop bits. It also adds a carriage return (CR) suffix and programs the
following prefixes for each symbology:

Honeywell Bioptic Aux Port

Scan the following Plug and Play code to program the scanner for a Honeywell
bioptic scanner auxiliary port configuration. This barcode sets the baud rate to
38400 bps and the data format to 8 data bits, no parity, 1 stop bit.

Symbology

Prefix

UPC-A

UPC-E

EAN-8

EAN-13

Verifone Ruby Settings