Ean/jan-13 addenda, Ean/jan-13 addenda required – Honeywell Granit 1991iSR Ultra-Rugged Standard-Range Barcode Scanner User Manual
Page 183

Granit XP User Guide
167
EAN/JAN-13 Addenda
This selection adds 2 or 5 digits to the end of all scanned EAN/JAN-13 data.
Default
=
Off for both 2 Digit and 5 Digit Addenda.
EAN/JAN-13 Addenda Required
When
Required
is scanned, the scanner will only read EAN/JAN-13 barcodes that
have addenda.
Default
=
Not Required.
EAN-13 Beginning with 290 Addenda Required
This setting programs the scanner to require a 5 digit addenda only on EAN-13
barcodes that begin with “290.” The following settings can be programmed:
Require 5 Digit Addenda
: All EAN-13 barcodes that begin with “290” must have a
5 digit addendum. The EAN-13 barcode with the 5 digit addendum is then trans-
mitted as a single, concatenated barcode. If a 5 digit addendum is not found within
the
period, the EAN-13 barcode is discarded.
Note:
If you are using
EAN-13 Beginning with 290 Addenda Required
setting will take precedence.
2 Digit Addenda On
* 2 Digit Addenda Off
5 Digit Addenda On
* 5 Digit Addenda Off
Required
* Not Required