Honeywell Granit 1991iSR Ultra-Rugged Standard-Range Barcode Scanner - Manual (Page 163)

Granit XP User Guide 147
When Check Digit is set to Validate and Transmit , the scanner only reads Inter-
leaved 2 of 5 barcodes printed with a check digit, and will transmit this digit at the
end of the scanned data.
Default = No Check Digit.
Interleaved 2 of 5 Message Length
Scan the barcodes below to change the message length. Refer to Message Length
Description (page 140) for additional information. Minimum and Maximum
lengths = 2-80. Minimum Default = 6, Maximum Default = 80.
FEBRABAN Decode
Scan the barcodes below to turn FEBRABAN Boleto decoding on or off. Default =
Off.
* No Check Digit
Validate, but Don’t Transmit
Validate and Transmit
Minimum Message Length
Maximum Message Length
FEBRABAN Decode On
*FEBRABAN Decode Off