About the bluetooth status and battery icons, About the bluetooth status icon, About the battery status icon – Honeywell Granit 1991iSR Ultra-Rugged Standard-Range Barcode Scanner User Manual
Page 64: R more information see

48
Granit XP User Guide
About the Bluetooth Status and Battery Icons
About the Bluetooth Status Icon
The blue Bluetooth Icon LED has two behaviors flash and on. The icon will flash
when linking to a device then will remain on, indicating the base and scanner are
linked and stays on when the scanner is in base.
Once the scanner is removed from base, the blue LED stays on for four seconds
then turns off.
Note:
Link status can be checked by holding the trigger for three seconds, the BT LED will
stay on for four seconds when BT is linked.
About the Battery Status Icon
The Battery status icon displays the charged level of the battery. Low-power alerts
are non-configurable. See the table below to learn more about low power
indicators.
Bluetooth Status Icon
Battery Status Icon:
Scanner LED
Scanner Beep
Charge Level
Yellow 3 sets of flashes
No beep
<15%