Honeywell Granit 1991iSR Ultra-Rugged Standard-Range Barcode Scanner - Manual (Page 23)

Granit XP User Guide 7
1. Connect the appropriate interface cable to the device, then to the computer.
2. If you are connecting the base horizontally, make sure the cables are secured in
the wireways in the bottom of the cordless base and the base sits flat on a
horizontal surface.
Note: The power supply must be ordered separately, if needed.
3. Turn the terminal/computer power back on. The scanner beeps.
4. Verify the scanner or cordless base operation by scanning a barcode from the
Sample Symbols, beginning on page 287. The scanner beeps once.
For further RS485 settings, refer to RS485 , page 14.
Corded Granit XP Scanner RS485 Connection:
CCB22-100BT-03N Base RS485 Serial Port Connection: