In step – Brother QL-810W Ultra-Fast Label Printer with Wireless Networking User Manual
Page 84
Printing Labels Using P-touch Template
74
5
e
From the list of barcodes under "Basic settings", scan each barcode to send a command or setting to the
Label Printer.
Note
• Settings can be made with multiple commands.
• If no settings have been made by scanning the barcode commands, a template will be printed using the
P-touch Template settings. The default P-touch Template settings are to print a single copy with [
Auto
Cut
] turned [
On
].
For more information on P-touch Template Settings, download
P-touch Template Manual/Command
Reference
(English only) from the Brother support website at
[Select your region/country.] - [Manuals] - [Choose your product]
• To specify the number of copies you want, scan the “Number of copies” barcode, and then scan the
barcodes under “For entering numbers” to specify a three-digit number.
Example:
Specify numbers by scanning the following barcodes: 7
i
[0][0][7], 15
i
[0][1][5]
• To change the setting for the number of copies, scan the “Number of copies” barcode again, and then scan
the barcodes for the new three-digit number.
f
Scan the barcode under “Preset template number” with the same number as the [
Key Assign
] number
for the label layout you want.
g
The specified label is printed.