Brother QL-810W Ultra-Fast Label Printer with Wireless Networking - Manual (Page 104)

Other Functions
94
6
d In the Distributed Printing Settings dialog box, select the Label Printers you want to use for distributed
printing.
a). Click [ Detect Current Paper Information... ] (1).
b). The current Label Printer information detected appears below [ Current Paper ] and [ Paper Type ] (2).
c). Select the check box next to the [ Printer Name ] you want (3).
Note
• If the selected label width is different from that displayed in the [ Current Paper ] column, the icon
appears. Load the Label Printer with the label width specified in [ Set Width ].
• If multiple Label Printers are connected, you can find the Label Printer you want using its port name. The
xxxxxxxxxxxx in BRNxxxxxxxxxxxx in the port name indicates the MAC address/Ethernet address of the
Label Printer. The MAC address/Ethernet address can be checked by printing the Label Printer set-up
information. For more information, see
Confirming the Label Printer Settings on page 84.
3 2
1