Brother QL-810W Ultra-Fast Label Printer with Wireless Networking - Manual (Page 75)

Changing the Label Printer Settings
65
4
Advanced Tab
4
The following explains about the Advanced Tab in the settings dialog box.
• Print Density (Black)
Sets the density of black.
Available settings: [
+6/+5/+4/+3/+2/+1/0/-1/-2/-3/-4/-5/-6 ]
• Print Density (Red)
Sets the density of red.
Available settings: [
+6/+5/+4/+3/+2/+1/0/-1/-2/-3/-4/-5/-6 ]
• Printer Information Report
Selects the information you want to include in the Printer Information Report.
Available settings: [
All ], [ Usage Log ], [ Printer Settings ], [ Printer Transfer Data ]
• Print Data after Printing
Specifies whether or not print data is erased after printing.
Available settings: [
Keep Print Data ], [ Erase All Print Data ]
Management Tab
4
The following explains about the Management Tab in the settings dialog box.
• Command Mode
Selects the type of command mode.
Available settings: [
Raster ], [ ESC/P ], [ P-touch Template ]
• Airplane Mode
Selects On to set the Label Printer to Airplane Mode. The following conditions apply:
QL-810W: Pressing and holding the Wi-Fi ( ) Button and WPS Button will be ineffective.
QL-820NWB: [
WLAN ] and [ Bluetooth ] menus will disappear from the display.
Available settings: [ Off ], [ On ]