Brother QL-810W Ultra-Fast Label Printer with Wireless Networking - Manual (Page 51)

Changing the Label Printer Settings
41
4
5 Node Name
Displays the node name (nodes can be renamed). For more information, see Menu Bar on page 42.
6 Settings Tabs
Contains settings that may be specified or changed.
If appears in the tab, the settings in that tab will not be applied to the Label Printer.
7 Settings Display/Change Area
Displays the current settings for the selected item.
8 Refresh
Updates the displayed settings with the most recent information.
9 Exit
Exits [ Communication Settings ], and returns to the main window of the Printer Setting Tool.
Important
Settings are not applied to Label Printers if [ Exit ] is clicked without clicking the [ Apply ] button after
changing the settings.
10 Apply
Applies the settings to the Label Printer.
To save the specified settings in a command file, select [
Save in Command File ] from the drop-down list.
The saved command file can be used with the mass storage mode to apply the settings to a Label Printer.
For more information, see
Mass Storage Mode (QL-820NWB only) on page 86.
Important
Clicking [ Apply ] applies all settings in all tabs to the Label Printer.
If the [ Disable these settings ] check box is selected, the settings in that tab are not applied.