Brother QL-810W Ultra-Fast Label Printer with Wireless Networking - Manual (Page 70)

Changing the Label Printer Settings
60
4
P-touch Template Settings Dialog Box
4
1 Default Command Mode
Specifies the P-touch Template mode as the default mode.
To change the mode, see the
Management Tab on page 57.
2 Default Template Number
Specifies a default template number that the Label Printer sets when it is turned on. If you do not want to
transfer a template to the Label Printer, do not specify a template number.
3 Data Delimiter for P-touch Template
Displays a symbol used to indicate the boundaries between groups of data in a file. Between 1 and 20
characters can be specified.
4 Trigger for P-touch Template Printing
Specifies a trigger to begin printing from a number of options.
[
Command Character ]: Printing starts when the command character specified here is received.
[ Data Insertion into All the Objects ]: Printing starts when the delimiter for the last object is received.
[ Received Data Size ]: Printing starts when the number of characters specified here is received. However,
delimiters are not counted in the number of characters.
5 Character Code Table
Selects one of the following character code sets:
Available settings: [
Windows 1252 ], [ Windows 1250 Eastern Europe ], [ Brother standard ]
1
2
3
5
15
13
4
6
7
8
9
11
12
14
10