Brother QL-810W Ultra-Fast Label Printer with Wireless Networking - Manual (Page 57)

Changing the Label Printer Settings
47
4
• User ID/Password
You can specify settings only when LEAP, EAP-FAST, PEAP, EAP-TTLS or EAP-TLS is selected as the
authentication method. In addition, with EAP-TLS, it is not necessary to register a password, but a client
certificate must be registered. To register a certificate, connect to the Label Printer from a web browser,
and then specify the certificate. For more information on using a web browser, see
Web Based
Management on page 160.
• Display the key and password on-screen
If this check box is selected, keys and passwords are displayed in plain (non-encrypted) text.
Communication Modes and Authentication Methods/Encryption Modes
4
 When [ Communication Mode ] is set to [ Ad-hoc ]
 When [ Communication Mode ] is set to [ Infrastructure ]
Important
To specify higher level security settings:
When performing certificate verification with EAP-FAST, PEAP, EAP-TTLS or EAP-TLS authentication
methods, the certificate cannot be specified from the Printer Setting Tool. After the Label Printer is
configured to connect to the network, specify the certificate by accessing the Label Printer from a web
browser.
For more information on using a web browser, see
Web Based Management on page 160.
Authentication Method Encryption Mode
Open System None / WEP
Authentication Method Encryption Mode
Open System None / WEP
Shared Key WEP
WPA/WPA2-PSK TKIP+AES / AES
LEAP CKIP
EAP-FAST/NONE TKIP+AES / AES
EAP-FAST/MS-CHAPv2 TKIP+AES / AES
EAP-FAST/GTC TKIP+AES / AES
PEAP/MS-CHAPv2 TKIP+AES / AES
PEAP/GTC TKIP+AES / AES
EAP-TTLS/CHAP TKIP+AES / AES
EAP-TTLS/MS-CHAP TKIP+AES / AES
EAP-TTLS/MS-CHAPv2 TKIP+AES / AES
EAP-TTLS/PAP TKIP+AES / AES
EAP-TLS TKIP+AES / AES