Brother QL-810W Ultra-Fast Label Printer with Wireless Networking - Manual (Page 58)

Changing the Label Printer Settings
48
4
Wireless Direct Tab
4
The following explains about the Wireless Direct Tab in the settings dialog box.
Wireless Direct Settings
4
• SSID/Network Key Generation
Select [ AUTO ] or [ STATIC ].
• SSID (Network Name)/Network Key
Specifies the SSID (25 ASCII characters or fewer) and the network key (63 characters or fewer) you want
to use in the Wireless Direct mode.
Note
The factory settings for the SSID and password are as follows:
SSID: "DIRECT-*****_QL-810W" or "DIRECT-*****_QL-820NWB" where "*****" is the last five digits of the
product serial number.
(You can find the product serial number label in the DK Roll Compartment of the Label Printer.)
The password: 810*****/820***** where ***** is the last five digits of the product serial number.
• Channel
Specifies the channel to use for the Wireless Direct mode.