Brother QL-810W Ultra-Fast Label Printer with Wireless Networking User Manual
Page 105
Other Functions
95
6
e
Specify the label size.
A. If only one Label Printer has been selected.
In the
Distributed Printing Settings
dialog box from step
, select the Label Printer whose setting you
want to specify, and then either double-click it or right-click it, and then click [
Settings
]. From the [
Set
Width
] drop-down list, select the label size.
Note
Information displayed in the
Distributed Printing Settings
dialog box from step
can be entered in the
[
Notes
] text box.
B. If multiple Label Printers have been selected.
In the
Distributed Printing Settings
dialog box from step
, select the Label Printers whose settings
you want to specify, right-click them, and then click [
Settings
]. From the [
Set Width
] drop-down list,
select the label size. The same label size setting is applied to all selected Label Printers.
Note
The settings below [
Printer Settings
] and [
Notes
] are not available.
f
Click [
OK
] to close the label size setting window.
g
Click [
OK
] to close the
Distributed Printing Settings
window.
Setup is completed.
h
Click [
OK
] to start distributed printing.
Note
• It may not be possible to detect information for a Label Printer connected using a USB hub or print server.
Before printing, enter the settings manually, and check if the Label Printer can be used for printing.
• Depending on whether a router is used and the security features in use, such as a firewall, it may not be
possible to use this function.
• We recommend performing a connection test for your operating environment. Contact your information
technology manager or administrator for assistance.