Brother QL-810W Ultra-Fast Label Printer with Wireless Networking - Manual (Page 64)

Changing the Label Printer Settings
54
4
Basic Tab
4
The following explains about the Basic Tab in the settings dialog box.
• Auto Power On
Specifies whether the Label Printer turns on automatically when the AC Power Cord is plugged into an AC
power outlet.
Available settings: [
Off ], [ On ]
• Auto Power Off (AC/DC)
Specifies the period of time that passes before the Label Printer turns off automatically when connected
to an AC power outlet.
Available settings: [
None ], [ 10/20/30/40/50/60 Minutes ]
• Auto Power Off (Li-ion)
Specifies the period of time that passes before the Label Printer turns off automatically when powered by
the Rechargeable Li-ion Battery.
Available settings: [
None ], [ 10/20/30/40/50/60 Minutes ]
Note
Auto Power Off is disabled when connecting with wireless network, wired network (QL-820NWB only), or
Bluetooth connection (QL-820NWB only).
• Eco Charging
Specifies whether to operate in Eco Charging mode. The service life of the battery can be extended by
setting it to charge to [
80% ] capacity.
Available settings: [ 100% ], [ 80% ]
Note
To get the longest life from the battery, select [ 80 % ]. Although the number of pages that can be printed
on a single charge will be less when you select [ 80 % ], you can get a longer life from the battery.