Printer setting tool for mac, Before using the printer setting tool, Using the printer setting tool for mac – Brother QL-810W Ultra-Fast Label Printer with Wireless Networking User Manual
Page 72
Changing the Label Printer Settings
62
4
Printer Setting Tool for Mac
4
Using the Printer Setting Tool, you can specify the Label Printer's communication settings and device settings
from a Mac. Not only can you change the device settings for one Label Printer, but you can also apply the
same settings to multiple Label Printers.
Note
The Printer Setting Tool is installed automatically when you use the initial installer to install the printer
driver. For more information, see
Installing the Software and Printer Drivers to a Computer
Important
The Printer Setting Tool is available only with compatible Brother Label Printers.
Before Using the Printer Setting Tool
4
Make sure the AC Adapter is connected to the Label Printer and to an AC power outlet, or a fully-charged
battery is installed.
Make sure the printer driver has been installed correctly and you can print.
Connect the Label Printer to a computer with a USB cable. Settings cannot be specified using Wi-Fi by
using this tool.
Using the Printer Setting Tool for Mac
4
a
Connect the Label Printer you want to configure to the computer.
b
Click [
Macintosh HD
] - [
Applications
] - [
Brother
] - [
Printer Setting Tool
] - [
Printer Setting Tool.app
].
The
Printer Setting Tool
window appears.
c
Check that the Label Printer you want to configure appears next to [
Printer
]. If a different Label Printer
appears, select the Label Printer you want from the pop-up list.
Note
If only one Label Printer is connected, it is unnecessary to make a selection because only that Label Printer
will appear.
d
Select a settings tab, and then specify or change the settings.
e
Click [
Apply Settings to the Printer
] in the settings tab to apply the settings to the Label Printer.
f
Click [
Exit
] to finish specifying settings.
Important
Use the Printer Setting Tool to configure the Label Printer only when the Label Printer is waiting for the
next print job. The Label Printer may malfunction if you try to configure it while it is handling a print job.