Brother QL-810W Ultra-Fast Label Printer with Wireless Networking - Manual (Page 29)

Setting Up the Label Printer
19
1
WLAN WLAN
(On/Off) On
Off Select whether to turn the WLAN
function On or Off.
Network Mode Infrastructure
Mode
Direct Mode
Infra/
Direct Mode Set which network is used when you
select [
On ] from [ WLAN (On/Off) ].
WPS Button
Push Try to connect to wireless access
points in the vicinity.
WPS PIN Code Display the Label Printer's 8-digit pin
code.
Infra
Manual
Setting Display the SSIDs of wireless
access points in the vicinity.
After you select an SSID and press
the OK Button, the password entry
screen will appear. Push the Cancel
Button several times to return to the
previous screen until it is displayed.
Direct
Manual
Setting Manually enter the SSID and
password of a wireless access point
to connect. Push the Cancel Button
several times to return to the
previous screen until it is displayed.
WLAN Status Infrastructure
Mode Status: ****
SSID: ****
IP Addr: *.*.*.*
NodeName: ****
Subnet: *.*.*.*
Gateway: *.*.*.*
MAC Addr: **** Display the WLAN status.
Direct Mode Status: ****
SSID: ****
IP Addr: *.*.*.*
Password: ****
Channel: **** Display the WLAN status.
Bluetooth Bluetooth
(On/Off) On
Off Turn the Bluetooth function on or off.
Automatic
Reconnection On
Off Switch to Automatic Reconnection
mode (only for Apple device : iPad,
iPhone, or iPod touch).
Bluetooth
Status Usage: ****
Device: ****
Visible: ****
Address: **** Display the status of the Bluetooth
function.
Menu Title Sub title Settings Description