Brother QL-810W Ultra-Fast Label Printer with Wireless Networking User Manual
Page 35
Printing Using a Computer (P-touch Editor)
25
2
2 Press and hold the Cutter ( ) Button and the Power ( ) Button for about one second. The Status LED
starts blinking in green.
3 The Status LED is lit in orange, the Editor Lite LED flashes in green and the Wi-Fi LED flashes in blue.
While pressing the Power ( ) Button, press the Cutter ( ) Button once and the Status LED lights in
orange.
4 Release the Power ( ) Button. Then the Status LED is lit in orange, the Editor Lite LED flashes in green
and the Wi-Fi LED flashes in blue. The Wi-Fi settings of the printer is reset.
For QL-820NWB
Select [
Network Reset
] from the menu.
For more information, see
Note
• We recommend making a note of the SSID (network name) and password (network key) of the wireless
network in advance.
• To achieve the best results with normal everyday document printing, use the Label Printer as close to the
Wi-Fi access point/router as possible with minimal obstructions. Large objects and walls between the two
devices as well as interference from other electronic devices can affect communication, or the data
transfer speed of your documents.
Connecting the Label Printer to your Wi-Fi access point/router
a
First, write down the SSID (network name) and password (network key) of your Wi-Fi access
point/router.
b
Connect the Label Printer and computer with a USB cable.
c
Configure the Infrastructure Mode settings of the Label Printer.
Using the Label Printer (QL-820NWB only)
1 Press the Menu and
▼
Buttons to select the [
WLAN
] menu, and then press the OK Button.
2 Press the
▼
Button to select the [
Network Mode
] menu, and then press the OK Button.
3 Select [
Infrastructure Mode
], and then press the OK Button.
Note
The SSID can also be entered using the LCD. Press the Menu and
▼
Buttons to select the [
WLAN
] menu,
and then press the OK Button. Press the
▼
Button to select the [
Infra Manual Setting
]. Push the
Cancel Button several times to return to the previous screen until it is displayed.
For Windows
1 Start the Printer Setting Tool on your computer, and click [
Communication Settings
]. Select
[
Infrastructure or Ad-hoc
] or [
Infrastructure and Wireless Direct
] for [
Selected Interface
] in
[
Communication Settings
] in the [
General
] tab, and select [
Infrastructure
] for
[
Communication Mode
] in [
Wireless Settings
] in the [
Wireless LAN
] tab.